Identix rPad - Reading RFID Tags; In Transparent Mode Operation

MiniPad – rPad User Guide
7
© 2015-2017 – Identix Inc. All Rights Reserved.
To change the operation mode between Transparent and HID, edit the entry “Opmode” on the
configuration file.
Warning! Use only Windows Notepad to edit the configuration file.
After saving the configuration file, the MiniPad / rPad reader will automatically switch to the
selected operating mode.
Reading RFID Tags
In Transparent Mode Operation
1. Configure the device to operate in “Transparent Mode” by editing the configuration file.