Identix rPad - Updating RFID SIP Firmware; Identifying Current RFID SIP Firmware Version

MiniPad – rPad User Guide
29
© 2015-2017 – Identix Inc. All Rights Reserved.
Updating the “RFID SIP Firmware” on MiniPad – rPad devices
MiniPad and rPad devices have 02 distinct firmwares with specific instructions for updating each one
of them. The first one is the “RFID-SIP” firmware (related to low level functions of the UHF Gen2
protocol) and the other one is the “Controller Firmware” (which manages the device connectivity to
the Host computer). This chapter contains specific instructions to update the “RFID SIP Firmware”
only.
1) Open the device information file to identify the current firmware version. Connect your
device to a Windows machine and open the “Identix” drive that is automatically mounted
when you connect the device to the computer. The file that contains the device information
is named “IdevInfo.txt”