iDevices Kitchen thermometer - App Issues (iPhone;iPad;iPod)

16
• Tap “Restart Android Bluetooth” and “Restart” when prompted
Bluetooth will restart on your Android device and you will have the ability
to pair.
If you do not see the Kitchen Thermometer in your Bluetooth settings,
please ensure that you are using the iDevices Connected app. If you
experience further problems, please contact our Customer Support Team
for further assistance.
I’m experiencing a problem with the iDevices Connected app for
my iPhone, iPad or iPod touch.
The iDevices Connected app requires iOS 7.0 or higher to operate.
If you are experiencing a problem with the iDevices Connected app for
iOS, please try following the steps below to resolve any potential problems
on the device-side:
• Make sure the Kitchen Thermometer is paired with your smart
device via Bluetooth and a temperature probe is plugged into the
unit.
• Tap the Home button on the smart device.
• From the Home screen, double tap the Home button again. This will
zoom out of the home screen and display any/all previously running
apps on your smart device.
• Swipe to locate the “iDevices Connected” app.
• Swipe the “iDevices Connected” app image upward to close the
existing session.
• Tap the Home button on your smart device to close the Multitasking
Bar.
• Re-open the iDevices Connected app by tapping the app icon on
the Home screen.
If you are still experiencing a problem after completing these steps, please
contact our Customer Support Team for further assistance.