IDS400 USER MANUAL NO. 700-204-01A ISSUED NOV 2000 VER 1.01 17
IDS400 USER MANUAL
keypad audible indicator sounds.
L A PANIC ALARM can also be activated by any FIXED PANIC or
REMOTE PANIC buttons which have been installed.
L If audible panic option has been selected, the siren will sound,
and the PANIC REPORTING CODE will be transmitted to the
monitoring company.
L To silence the siren, enter a valid 4 digit [USER CODE]. If the siren
is not cancelled, it will stop automatically after the programmed
SIREN TIME OUT period.
L Ensure that your installer has enabled this function if it is
required.
L Press this key only in an emergency situation that requires
response by emergency personnel.
8.4 Duress Code
[#] + [DURESS CODE]
L This is a special 4 digit user code which should only used in the
unique situation where an intruder forces one to disarm the
system “under duress”.
L When the [DURESS CODE] is entered, the control panel disarms
normally - however a DURESS REPORTING CODE is trans-
mitted to the monitoring company to inform them that you have
been forced to disarm the control panel by an intruder.
L It is advisable to choose a code that can be easily remembered
by all family (or staff) members.
9.0 Emergency Evacuation Plan
An emergency evacuation plan should be established in case of a fire:
L Draw up a floor plan of your premises showing windows, doors,
stairs and rooftops that can be used for escape.
L Indicate a suitable escape route for each room; and always
keep these routes free of obstruction.
L Set a meeting place outdoors for a headcount of the building
occupants.
L Practice escape procedures.
To Next Page
Loading...
Need help?
General
