GB
9 - PART REPLACEMENT KID 70
9 - Pag. 4 / 4
9.5 RECOMMENDED SPARE PARTS
INFORMATION:
replace the too worn parts by using original spare parts. Use only oil and grease
recommended by the manufacturer. All the above hints will assure the good
performance of the bar feeder as well as its safety.
Below are listed the recommended spare parts to have in stock.
Code Denomination Features Notes Quantity
32210013 Sensor BERO 3RG4012-
0AG33 BERO
2
806002286 Roller conveyor guide unit 1
24373000 Feed belt HTD 8 M20 479 PA 1
Bar pusher Specify the
diameter
1
Revolving tip Specify the
diameter
1
9.6 BAR FEEDER DISMANTLING
INFORMATION:
this activity must be carried out by expert operators, respecting the laws in
force on the subject of labour safety. Do not disperse in the environment
products that are not decomposable into organic substances, lubricating oil and
nonferrous components: e.g. rubber, PVC, resins, etc. Carry out their disposal
by respecting the laws in force on the subject.
To Next Page
Loading...
