6
Avoid static and dynamic overpressure exceeding the specified overload
pressure by taking appropriate measures� The indicated bursting pressure
must not be exceeded�
Even if the bursting pressure is exceeded only for a short time, the unit
may be destroyed. NOTE: Risk of injury!
The units are vacuum resistant�
Pressure Equipment Directive (PED):
The units comply with the Pressure Equipment Directive and are designed
and manufactured for group 2 fluids in accordance with the sound
engineering practice. Use of group 1 fluids on request!
4 Function
• The unit displays the current system pressure�
• It generates output signals according to the operating mode and the parameter
setting�
• It moreover provides the process data via IO-Link�
• The unit is designed for fully bidirectional communication�
So the following options are possible:
- Remote display: reading and displaying the current system pressure�
- Remote parameter setting: reading and changing the current parameter
setting�
- IO-Link parameter setting (→ 4.4)
To Next Page
Loading...
