IFYIL GT-25 - Settings

23
5.4.6 Settings
Settings menu contains a number of data and images, such as the main menu. This
works as described for the main menu .
Function
Value
Language
IT–EN–FR–ES–DE–PT–NL-GR-TR
Eco mode
On / Off
Backlight
On – 1200” (10” steps)
Remote control
On / Off
° C - ° F
Auto/ °C/ °F (Part.6.4.7.2)
Combustion formulas
Hopper load (combustion bowl fuel loading)
Cleaning (running Chimney Fan) *
Pump activation **
Boiler Type
Table5-2- Setting menu list
*only visible heater off
**only visible heater off and hydro mod on
5.4.6.1 Hopper filling
"Hopper fill" option is only heating up menu appears in the closed position and benefit
the pellet feeder to fill the pelleting
Set (# 3) can be changed by pressing the button panel display
Esc (# 1) by pressing the screen returns to the previous screen, Arrow (# 3) by pressing
the function started. Esc (# 1) by pressing the previous screen is restored and the
function stops. Function is active, the On / Off (# 5) can be stopped by pressing the
button and the panel will return to the start screen.
5.4.6.2 Cleaning
"Cleaning" option (on the panel "Clean" appears) is only visible while running the
utility off the boiler and chimney fan manually.
Set (# 3) is pressed, a screen similar to the image displayed on the panel until 15. Esc (#
1) by pressing the screen returns to the previous screen, Arrow (# 3) by pressing the
function is initiated and approved. Again (# 3) by pressing the operation is stopped.