24
5.4.6.3 Pump Activation
"Pump enable" choice, boilers appear to be enabling position just off the panel at
the pump.
With this function the heating more quickly and with more water fills the operation
of the circulation pump is provided. At the same time easier way drain valve with air
bubbles ejected.
5.4.7 Technical Menu
This menu is intended for service purposes, and includes the setting of all the items
reserved for technical personnel only; accessing this menu is password protected
5.5 ALARMS
In such a case, the "START" (start) is inaccessible to screen and block heater status
can not be changed without removing the case.
Bottom line fault type and name of the
author, blink text in the middle of the top
line failure.
figuer5-17– ALARM screen 1
Press the power button can stop the breakdown sound. On / Off (# 5) key, you hold
your boiler will control more than 2 seconds alarm). After verification instructions, it
returns to the initial screen image exceeds the alarm.
figure5-18- ALARM screen 2
When the fault screen is displayed for 5 seconds by pressing the # 1 key to access the
main menu. From this menu, giving rise alarmed error corrected. Heater status can be
observed from this menu.
To Next Page
Loading...
