25
İnfo brief description of the problem
that occurs when pressing is seen on the
screen.
figure5-19– ALARM screen 3
" On the top line "info" instead of "ESC" appears, a brief description of the problem
that occurred in the bottom line of text on the display FAULT displayed. pressing Esc will
return to the previous screen. 60 seconds during the display returns to start another key
is pressed.
Ignition failed to clean the combustion bowl,
and restart your boiler.
Make sure your boiler combustion mode
AUTO. Fill pellet tank.
Pellet tank over-tempereature
See instruction manuel. turn off your boiler
again.
plumes temperature is out of
range.
overheated chimney of your boiler, turn off
your boiler again. Inform your dealer.
in your boiler flue blockage or backflow
current. Resolve thes drawbacks.
Check braizer cleaning/ air intalke/chimney
temperature sensor failure
igniter cord to make sure there is a gap or
crushed. Call your service.
Electronic mother board error
Water pressure out of range
Restore the correct system pressure
Water tank ovetemperature
To Next Page
Loading...
