IK Multimedia iRig Keys I/O - Irig Keys I;O Integration with IK Virtual Instruments

English
17
4.2.1 iRig Keys I/O integration with IK Virtual Instruments
SampleTank 3 and Miroslav Philharmonik 2
1. Launch SampleTank 3;
2. Rotate the DATA knob and scroll between the folders of the SampleTank 3 library;
3. Press the DATA knob to disclose a folder and load an instrument;
4. Press PROG up and down buttons to browse and load SampleTank 3 Multis according to the current Live
Set preset loaded on SampleTank 3;
5. Rotate knobs 1 to 4 on iRig Keys I/O to control the first four macros of SampleTank 3. If the Touch CC is
enabled, as soon as you touch a knob this will highlight on the user interface;
6. To access knobs 5 to 8 on your iRig Keys I/O, press the ALT button on the left side of the display, then
rotate, so you can control the remaining next four macros of SampleTnak 3;