English
27
5.2.4 Send “All Notes Off” MIDI message
Sometimes it may be necessary to stop all notes playing on the current MIDI channel when they are stuck or
when controllers are not resetting properly.
iRig Keys I/O can send MIDI CC# 121 + 123 to reset all controllers and stop all notes. To reset all controllers and
set all notes off:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Press the DATA push-knob to confirm you want to edit a parameter in the global
menu;
• By rotating the DATA knob you will cycle between the parameters of the Global menu;
• Reached the OFF position pess the DATA push-knob to confirm you want to send a note off message;
• The keyboard will exit automatically the Edit Mode;
• You can exit the Edit mode any time by pressing the CANCEL/NO key.
5.2.5 Reset iRig Keys I/O
iRig Keys I/O can be reset to its original factory value of MIDI channel, Programm change, Audio volume, active
preset, velocity, transpose, octave and controls assignations. Note that the factory reset won’t delete the store
User presets.
To reset iRig Keys I/O:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Press the DATA push-knob to confirm you want to edit a parameter in the global
menu;
• By rotating the DATA knob you will cycle between the parameters of the Global menu;
• Reached the RST position press the DATA push-knob to confirm you want to reset the keyboard
parameters;
• The keyboard will request you to confirm if you want to perform the reset, by showing CFM;
• By pressing the DATA push-knob the keyaboard will be resetted and it will exit automatically the Preset
Mode;
• You can exit the preset mode any time by pressing the CANCEL/NO key.
To Next Page
Loading...
Need help?
General
