English
22
5 Edit Mode
In Edit Mode you can edit parameters related to the keyboard, pads, touch controls, knobs and perform a
factory reset.
To enter to the Edit Mode, press the ALT button and then the EDIT button:
The display will shows GLO (global menu) to edit the global parameters and, by rotating the DATA knob, PRE
(preset menu) to edit the parameters associated to the preset. It is possible to select global or preset by rotating
the DATA knob: the confirmation of each action is provided by pushing the DATA knob.
In GLO (global menu) you will find: PC (program change) - KEY (keyboard) - TCH (touch knobs) - OFF (all-notes-
off) - RST (factory reset)
In PRE (preset menu) you will find: DTA (DATA knob) - ENC (knobs) - PED (external pedal) - PAD (drum pads) -
SLD (sliders) - TRN (transport).
5.1 Audio output volume
By default the audio output volume is set as ALT function of the DATA knob, so to adjust the audio output
volume press the ALT button and rotate the DATA knob. The audio volume can be assigned as primary or ALT
function by the user. Please refer to the dedicated section on this manual.
5.2 Global edit menu
To Next Page
Loading...
Need help?
General
