English
30
10.2.23 Assign CC/PC/Note/MIDI CH to the Expression Pedal
To assign CC, PC, MIDI CH or Note to an expression pedal, please refer to the procedures described above for
the footswitch pedal (points “10.2.19”, “10.2.20”, “10.2.21” and “10.2.22”).
11 External iRig Pads MIDI control
iRig Pads can switch scenes and light up pushbuttons and pads via external MIDI control.
iRig Pads receives on MIDI Channel 1.
11.1 Backlight control
Pushbuttons and pads can be illuminated from the host application by sending MIDI Control Changes to iRig
Pads:
SCENE Pushbutton: CC (21-20), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
FIX VEL Pushbutton: CC (23-22), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pushbutton 1: CC (25-24), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pushbutton 2: CC (27-26), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 1: CC (95-94), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 2: CC (97-96), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 3: CC (99-98), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 4: CC (101-100), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 5: CC (87-86), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 6: CC (89-88), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 7: CC (91-90), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 8: CC (93-92), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 9: CC (79-78), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 10: CC (81-80), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 11: CC (83-82), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 12: CC (85-84), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 13: CC (71-70), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 14: CC (73-72), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 15: CC (75-74), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
Pad 16: CC (77-76), velocity from 0 to 127 controls the intensity of the LED (RED-GREEN)
11.2 Remote scene switching
iRig Pads will automatically switch scenes when receiving Program Changes from 1 to 16.
To Next Page
Loading...
Need help?
General
