4
2. General Description
2.1 Features
● High-resolution image display
A full high-definition panel with a resolution of 1920(H) x 1080(V) dots is employed for
displaying extremely fine images.
● Higher brightness and wider view angle
The view angle is as wide as 178° from all directions. No matter where the monitor is set
up, images can be comfortably viewed from different angles.
● Less afterimages
The LCD panel has a higher response speed, which reproduces images with less
afterimages.
● 10-bit signal processing
Input signals are processed to 10-bit signals, enabling smoother gradation.
● Jaggy-less I/P conversion (Interlaced-to-Progressive conversion)
The unit is equipped with a jaggy-less I/P converter in order to convert NTSC, PAL and
HD interface signals to natural-looking images with unnoticeable jagged lines.
● Compatible with various types of signals
HDTV (1080i, 720P), SDTV (NTSC, PAL), PC inputs (analog and digital), SD-SDI and
HD-SDI signals can be applied.
● User-preset memory
The white balance, hue, and chroma values, etc. can be registered in the memory for
retrieval by the user to provide eight different types of settings.
● Meeting many safety standards
The medical-use monitor conforms to US UL60601-1, Canadian CSA22.2 No. 601.1 (cUL)
and European EN60601-1 safety standards too.
● MLW-3225C is a monitor intended for use in a medical environment to display pictures
from cameras or other system.
2.2 About Input Signals
● NTSC/PAL inputs (BNC and S terminal inputs)
The unit handles NTSC and PAL composite video signals, as well as S-Video signals,
which are automatically identified to be displayed.
● RGB and component signal inputs (BNC)
Various types of signals - NTSC, PAL, 480P, 576P, 1080i and 720P, for instance - can be
readily handled for images.
● Analog RGB (HD-15) and DVI-D signal inputs
Signals - VGA, SVGA, XGA, SXGA, UXGA, WUXGA, 480i, 575i, 1080i and 720P - can
also be readily accepted for images.
● Input of external sync signals
The unit can get in sync with external signals such as from cameras and sync signal
generators.
● SDI signals
The monitor is standard equipped with an SDI unit to get images from SD-SDI (NTSC,
PAL) and HD-SDI (1080i, 720P) digital signals.
To Next Page
Loading...
Need help?
General
