3
1. Precautions
Maintenance
• Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such
as benzene.
• Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a
ball-point pen or screwdriver. This type of contact may result in a scratched picture panel.
• Clean the screen with a soft cloth, If you use a glass cleaning liquid. Do not use any type
of cleaner containing an anti static solution or similar additive as this may scratch the
screen’s coating.
Concerning handling of EN60601-1-2 (EMI)
This device requires installation of the following cores:
• When DVI signal is input: Attach the supplied SFT-59SN to the connector base section.
• When PC signal is input: Attach the supplied SFT-59SN to the connector base section.
• When S-Video signal is input: Attach the supplied SFT-59SN and TFT-152613N (2T) to
the connector base section.
To Next Page
Loading...
