Ikegami MLW-3225C - Status Screen

11
5.4 Status Screen
This screen is used to display the current input signal information and the monitor settings.
Screen display
Status User Display Image Color Memory P-Pre
䂾
Signal Set. Component
User Memory
Color Mode
Gamma
Option Board
H/V.Frequency
Product Code
RGB
RGB
RGB
RGB
RGB
User1
User
2.2
No Option
䋪䋪
.
䋪
kHz /
䋪䋪
.
䋪
Hz
MLW-3225C
XXXXX
PC
DVI
OP-PC
OP-DVI
IN1: CH name - Signal name
IN2: CH name - Signal name
Switch behavior description
Status setting screen description
The selected input signal and the setting status are displayed.
• Signal Set.: Used to display the format setting of each input signal; RGB or
YPbPr.
• User Memory: Used to display the number of selected memory.
• Color Mode: Used to display the selected color setting.
• Gamma: Used to display the selected gamma level.
• Option Board: Used to display the added optional board.
• H/V. Frequency: Horizontal and vertical frequencies of the input video signal are
displayed.
• Product Code: The model name is indicated.
5. Operation