illy IPERESPRESSO X7.1 - GENERAL NOTICE; TECHNICAL DATA

23
EN
GENERAL NOTICE
Read the instruction manual and the warranty limitations
carefully.
The machine must be connected to a properly grounded power
outlet. The machine must be kept clean by frequently washing the
drip plate, drip tray, capsule holder, water tank, and steam wand.
EXTREMELY IMPORTANT: never immerse the machine
in water or put it in the dishwasher. The water in the
tank must be replaced regularly.
Do not use the machine without water in the tank. After changing
the water, return the tank to the machine, making sure it's correct-
ly inserted.
We recommend descaling the machine at least once every 2
months using a descaler specially designed for espresso machines,
following the instructions in the DESCALING section.
The machine is equipped with a valve to maintain constant pres-
sure, which may cause some water to drip from the capsule holder.
TECHNICAL DATA
Enclosure: PC+ABS (EU), PC (USA)
Thermoblock core: steel
Water tank: 1.0 litre
Pump: 15 bar
Coee pressure during extraction: 15 bar
Dimensions: 200 x 340 x 350 mm
2 solenoid valves
Circuit board with the following functions:
• automatic coee brew volume setting
• precision temperature control (coee and steam)
• descaling indicator
• thermoblock temperature indicator
• warning beep
• automatic descaling program
• power save
Steam wand
Cup rack
Weight without packaging: 5 kg
Voltage: 220-240V, 50/60Hz (EU); 120V, 60Hz (USA)
Power: 1200-1380W (EU), 1200W (USA)
Power consumption in power o mode: < 0.5W
Weighted sound level is below 70dB.
The manufacturer reserves the right to make changes or improve-
ments without prior notice.