EasyManua.ls Logo

illy IPERESPRESSO X7.1 - Installing and Using the Machine

illy IPERESPRESSO X7.1
238 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
EN
INSTALLING AND USING THE MACHINE
Before connecting the coee machine to the mains, carefully read the safety instructions in the section IMPORTANT SAFETY PRECAUTIONS.
1 2 3 4 5
CAUTION: only put
fresh, uncarbonated
drinking water in
the water tank. Hot
water and other liq-
uids can damage the
tank. Do not operate
the machine without
water in the tank.
Make sure the machine is
disconnected from the mains
power supply.
Insert the capsule holder from below and twist it to the right until
it locks in position.
Pull out the water tank to remove it and ll with fresh drinking
water up to the MAX mark.
6
Fit the tank into the machine;
make sure it's correctly
inserted.
Insert the plug into the socket.
See the next section for instruc-
tions on switching on and using
the machine.
7
D
I
O
NOTE: we recommend saving the original packaging
(at least during the warranty period) in the event the
machine needs to be sent for repair to an authorized
service centre.
CAUTION:
When the machine is working, the dispenser head
(D), steam wand (O) and metal parts of the capsule
holder (I) are hot and may cause burns if touched.

Table of Contents

Related product manuals