illy IPERESPRESSO X7.1 - Programming Coffee Amount; New Fill Level Setting; Manual Dispensing

31
EN
PROGRAMMING THE MACHINE TO DISPENSE A CERTAIN AMOUNT OF
COFFEE
You can programme the X7.1 to dispense exactly the amount of coee you want: just press the brew button when the machine has dispensed the desired amount: the machine will memorize the amount
and stop dispensing. You can also manually programme the amount of coee you want the machine to dispense.
1 2
Programming a new ll level setting:
• Insert a capsule in the capsule holder and click it into place in the dispenser head.
• Place a coee cup below the capsule holder.
• Press and hold the brew button.
• Once the machine has dispensed the right amount of coee, release the button.
• The new setting has been stored in the machine's memory.
You can use the manual dispensing mode to adjust the amount of coee dispensed for each new cup without changing the stored
settings.
Manual dispensing:
• Press and hold the brew button for 3 seconds. The machine dispenses coee.
• Once the machine has dispensed the amount of coee you want, press the button again to stop dispensing.
• The amount dispensed is not stored in the machine's memory.