36
CLEANING AND MAINTENANCE
The machine and its components should be cleaned at least once a week.
Do not use water which has been standing in the tank for a few days; pour it away and ll the tank with fresh drinking water.
Do not use ethyl alcohol, solvents, abrasive sponges and/or aggressive chemicals to clean the machine.
CAUTION: do not dry the machine or its components in a microwave or conventional oven.
To clean the machine, proceed as follows:
1
Switch o the machine and
remove the plug from the
power socket.
2
Remove the water tank and
cover and wash them under
running water.
3
Remove the capsule from the
capsule holder if present and
wash the capsule holder under
running water.
4 5 6 7 8 9
• Remove the drip plate and wash with lukewarm water.
• Remove the drip tray and wash with lukewarm water.
• Remove the outer tip of the steam wand.
• Remove the inner nozzle of the steam wand from the metal tube.
• After separating the two components, wash them separately
with lukewarm water.
• After washing the components, t the inner nozzle to the metal
tube and then slide the outer tip into place.
NOTE: make sure the inner nozzle and outer tip are tted
tightly in place.