illy IPERESPRESSO X7.1 - Page 35

35
EN
8 9
1 L
10 11 12
A long beep indicates the
descaling phase is complete.
The next step is to rinse the
machine's water circuits to
eliminate descaling solution
residue. The button keeps
ashing.
• Remove the water tank and wash it thoroughly. Fill it with 1 litre
of fresh water (up to the MAX line).
• Place the empty recipient of capacity of at least 1litre back under
the dispenser head and steam wand.
Press once and release the
button to start the rinsing cycle.
Buttons and ash
alternately.
The machine's dispenser
head and steam wand will
intermittently emit water while
the operation is in progress
(duration: 3 minutes).
A beep indicates the rinsing
phase is complete.
The
button lights up.