Menu and Enter
Repeat
OPERATIONAL INSTRUCTIONS
iPhone and iPod Operation
Selecting the Dock
• Press MODE to select iPod 1
or iPod/ iPhone 2 . “iPod” icon appears.
• If your iPod is detected, “iPOD” will display on the screen (iPhone priority).
• Press AUTO SCAN
to begin playback.
Playback
1. To pause playback, press
AUTO SCAN
. To resume playback, press AUTO SCAN again.
2. Short press
/ to scroll up or down music of your iPod on remote control.
3. During playback, please hold
/ on remote control to start high speed search. When the
desired passage is found on remote control, release the button. Normal playback resumes.
4. Press
SELECT to select iPod 1
or iPod 2 .
Charging your iPod battery
In standby, iPod, WB, radio, or Aux mode, your iPod will always charge in the dock.
iPhone Function
During playback of music or movies, an incoming call will pause the current le. After the call ends,
normal playback will resume.
When there's an incoming call, you should be able to answer while your iPhone is docked. If the
answer button is pressed to answer a call and the person on the other line is heard through the
unit's speakers, speak through the microphone on your iPhone. When the call ends, regular music
playback will resume.
iLuv | 18iMM183 | V10M10_IM_EN_09092009
NOTE: If your iPhone is in vibration only mode, the ring tone cannot be heard from the docking speaker. If your
iPhone is not in vibration mode, the ring tone can be heard from the docking speaker.
• Press MENU on the remote control when your iPhone or iPod is playing to return to the menu.
• You can press
UP or DOWN to select, and press ENTER to enter.
1. Press
REPEAT once on remote control while your iPhone or iPod is playing. The current track will repeat.
2. Press
REPEAT twice on remote control while your iPhone or iPod is playing. All tracks will repeat.
To Next Page
Loading...
