1. How to insert a dock adaptor
a. Please use dock adaptor that came with your iPhone or iPod.
b. Using the correct dock adaptor ensures the proper t for your iPhone or iPod.
c. Gently push the dock adaptor down into the universal dock.
d. Carefully place your iPhone or iPod into the universal dock. Your iPhone or iPod must not be
in a case or "Skin".
2. How to remove the dock adaptor
• Remove your iPhone or iPod rst, then carefully remove the dock adaptor.
Installing the Dock Adapter
GETTING STARTED
iLuv | 6iMM183 | V10M10_IM_EN_09092009
This unit operates on 6 X “AA” batteries (not included) for backup. Please note that batteries are important
because they provide emergency power for the receiver in the event that the AC power fails.
1. Open the Battery Compartment.
2. Insert 6 "AA" size batteries into the Battery Compartment, making sure that the batteries are installed
with the proper polarity (+/-) are maintained.
Important Note: Backup battery is used for Weather band only, if AC power fails and battery operating,
all other iPod, FM, AUX IN functions are unavailable and the MODE button will be invalid.
Notes on battery use:
• To save battery power, please always use AC adaptor for receiver power supply.
• Load new batteries with their polarities (+/-) aligned correctly.
• Do not apply heat to batteries, or internal short circuit may occur.
• If this unit is not to be used for a long period of time, remove all batteries and store them in a cool and dry place.
• Remove spent batteries immediately and dispose of them.
• Do not use old and new batteries together. Also never use an alkaline battery with a magnesium battery.
Backup battery time is approximately 54 hours.
Installing the Backup Batteries
To Next Page
Loading...
