ILX Lightwave LDC-3700B Series - Page 76

COMMAND REFERENCE
Command Reference
7/01 LDC-3700 Series 61
CHAPTER 4

Action Requests the value in the standard event status enable register.
Response The value must be between 0 and 255.
Bit Reference
Notes Bit 5 of the status byte register is set if any enabled conditions are true.
Response is the sum of the enabled bits.
*ESE?
Event Status Enable?
COMMON
DEVICE DEPENDENT
FRONT PANEL
0− Operation Complete 4− Execution Error
1− N/A 5− Command Error
2− Query Error 6− User Request
3− Device Dependent Error 7− Power On
76543210
76543210
&
&
&
&
&
&
&
&
Logical OR
Standard Event Status Register
Standard Event Status Enable Register
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com