Important Safety Warning
BEFORE BEGINNING: Read this guide carefully.
This manual will guide you during your installation and your check before starting the production.
CAUTION: This manual is for qualified staff having high skills and the necessary
experience in inverter installation as well as electricity. It is absolutely forbidden to
proceed to the mounting or dismounting of this kit if you do not have the necessary
skills.
CAUTION: Besides the electric risks on all the installation, the handling of batteries can be
dangerous. Never approach a spark of a battery recently charged. Gloves and safety
glasses are necessary to work near batteries for complete safety.
CAUTION: Authorized service staff should reduce the risk of electrical shock by
disconnecting AC, DC and battery power from the inverter before attempting any
maintenance or cleaning or working on any circuits connected to the inverter. Turning
off controls will not reduce this risk. Internal capacitors may remain charged for 5
minutes after disconnecting all sources of power.
CAUTION: Do not cover IMEON. It is fitted with a heat removal system to avoid any
overheating.
CAUTION: Do not disassemble IMEON yourself. It contains no user-serviceable parts.
Attempt to service IMEON yourself may cause a risk of electrical shock or fire and will
void the warranty from the manufacturer.
CAUTION: To avoid a risk of fire and electric shock, make sure that existing wiring is in
good condition and that the wire is not undersized.
The responsibility of the supplier could not be committed for damage caused by a bad maintenance or
by not respecting the instructions of this manual.
To Next Page
Loading...