EasyManua.ls Logo

IMEON 3.6 - Imeon 3.6

IMEON 3.6
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMEON 3.6
40
Manuel d’installation / Installation manual IMEON 3.6 Rev A.2
IMEON 3.6
For a smart management of your renewable energy installation in self-use.
IMEON is the ideal solution for all your systems of renewable power production (solar energy/ wind
energy / hybrid / …). Thanks to the IMEON, the produced energy is used and directed in an
intelligent way for optimal performance. Its technical conception by specific microprocessor drives
the energy according to the conditions of production and needs in consumptions.
x
3KW multi-use inverter
x
ON GRID / OFF GRID 48V / BACKUP
x
Increase of the yield > 30%
x
Simple and fast installation (Plug&Play)
x
Simplicity of use and exploitation
x
Economic at the purchase (unique product)
x
Great reduction ont the energy invoice
x
Optimized production performances
x
local or remote followed real time
SMART GRID
Thanks to the intelligence of management and the multi energy real-time coupling of the IMEON, the
yield is maximized by choosing the mode of energy presenting the best cost/efficiency ratio: either by
consuming it (self consumption), or by injecting the produced electricity in the electric grid or both at
the same time. Automatic adaptation to the installation’s configuration without necessary parameter
setting, is one of its many smart features.
ECONOMIC
No need for solar charging regulator, for source’s switch or for additional inverters. Thanks to its
intelligent (SMART GRID) functions, IMEON allows to store energy only when it is necessary and, by
improving the efficiency, to lower the price of energy produced by more than 30%. The intelligence of
management and the real-time multi-energy coupling allow to decrease the capacity of the battery and
to improve its life expectancy (number of cycles reduces).
ALL IN ONE
All the features of the IMEON are integrated into a unique case to replace various components:
inverter, charging regulator, sources switch, for: a greater reliability / optimization of the production
organs / reassurance of the persons / a saving of space for the installation / better performance / an
ease in the diagnostic of expertise / a local or distant monitoring, a simple and fast connecting
(Plug&Play) via connector RST and MC4 type.