IMEON 3.6 - Technical Specifications

IMEON 3.6
41
Manuel d’installation / Installation manual IMEON 3.6 – Rev A.2
FR
EN
Only one reference for every type of installation
Solar / wind / Hybrid / OFF-GRID / ON-GRID
Technical specifications
GRID (ON-GRID & OFF-GRID)
IMEON 3.6
Nominal output power :
3000 W
Maximum output power :
6000W*
AC voltage (input & output) :
230 Vac (±15 %) / 50 Hz (±5 %)
Nominal output current :
13 A
Maximum output current :
26 A*
SOLAR INSTALLATION
Maximum input power :
1500 to 3000 W
Start up voltage :
150 V
MPP voltage range :
120V – 450V (250V – 450V)
Maximum input current :
18 A
Maximum input voltage :
510 V
Solar production use :
Programmable priorities (PV / Storage / Grid)
Maximum efficiency :
DC to AC >95,5% (94,5% EU)
BATTERY & CHARGE
DC voltage :
48 Vdc
Maximum current :
80 A
Maximum battery charging current :
25 A
Type of batteries :
Gel, AGM
Charging curve :
3 phases (Bulk / Absorption / Float)
Voltage compensation :
Dynamic
Battery charge :
Programmable (Threshold / timing tange via AC Grid)
Battery discharge :
Programmable (2 threshold according to grid availibility)
GENERAL
Dimensions (w x h x d) :
440 x 620 x 160
Protection category :
IP 20
Weight :
18 kg
Connectivities :
TL (transformless)
Connectors :
USB / Modbus / Ethernet – IP (option)
Conditions of use
:
Humidity level : 5% to 90 % without condensation
T°C: 0°C to +50°C, degressive power >40°C (15W/°C)
Standards
:
EN 62109-2 / EN 62109-1 / EN 62040-1
DIN V VDE V 0126-1-1 (+VFR2013) / VDE-AR-
N 4105 /
DIN VDE V 0124-100
Warranty
5 years / Extension to 10 years (optional)
* Maximum possible overload power, time-limited, with solar + grid connected. Refer to the installation manual.