6-8
6.1.7 Motor
To control each axis, three motors are installed.
A common belt pulley is installed to each motor.
AZ axis
Name; AZ motor
Type; H-7BPSC0005 (motor only)
Mxxxx (with pulley)
Manufacturer; Japan Servo
EL axis
Name; EL motor
Type; H-7BPSC0006 (motor only)
Mxxxx (with pulley)
Manufacturer; Japan Servo
XEL axis
Name; XEL motor
Type; H-7BPSC0004 (motor only)
Mxxxx (with pulley)
Manufacturer; Japan Servo
6.1.8 GPS Antenna
The GPS antenna is connected to ACU with the 35cm
coaxial cable.
Name; GPS antenna
Type; H-7ABSC0015B
Manufacturer; Toko Densi
Fig. 6.1.8 GPS Antenna
To Next Page