Impulse Dynamics OPTIMIZER Integra CCM-D - Page 58

52
ETSI EN 300 330
GUIDELINES AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC
EMMISSIONS OF THE GUARDIO CHARGER PURSUANT TO:
ETSI EN 300 330 V2.1.1 – Short Range Devices (SRD); Radio equipment in the
frequency range 9kHz to 25MHz and inductive loop systems in the frequency range
9kHz to 30MHz; Harmonised Standard covering the essential requirements of
article 3.2 of Directive 2014/53/EU
The Guardio Charger, part of the OPTIMIZER Integra CCM-D System, is intended for use
in an electromagnetic environment as specified below. The customer or user of the
Guardio Charger must ensure that it is used within the specified environment.
Emissions Test
Compliance
Electromagnetic
environment –
guidelines
Permitted range of
operating frequencies
Complies with clause 4.3.2.3
The Guardio Charger
must emit electromagnetic
energy in order to perform
its intended function.
Nearby electronic
equipment may be
affected.
Modulation bandwidth
Complies with clause 4.3.3.3
Radiated H Field
Complies with clause 4.3.4.3
Transmitter Spurious
Emissions below 30MHz –
Operating and Stand-By
Mode
Complies with clause 4.3.8.3
Transmitter Spurious
Emissions 30-1000MHz –
Operating and Stand-By
Mode
Complies with clause 4.3.9.3
Receiver Spurious
Emissions up to 1000MHz
Complies with clause 4.4.2.3