Impulse Dynamics OPTIMIZER Integra CCM-D - Page 59

53
ETSI EN 301 839
GUIDELINES AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC
EMMISSIONS OF THE GUARDIO CHARGER PURSUANT TO:
ETSI EN 301 839 V2.1.1 – Ultra Low Power Active Medical Implants (ULP-AMI) and
associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to
405 MHz; Harmonised Standard covering the essential requirements of article 3.2
of the Directive 2014/53/EU
The Guardio Charger, part of the OPTIMIZER Integra CCM-D System, is intended for use
in an electromagnetic environment as specified below. The customer or user of the
Guardio Charger must ensure that it is used within the specified environment.
Emissions Test
Compliance
Electromagnetic
environment –
guidelines
Frequency Error
Complies with clause 4.2.1.1
The Guardio Charger
must emit electromagnetic
energy in order to perform
its intended function.
Nearby electronic
equipment may be
affected.
Emission Bandwidth
Complies with clause 4.2.1.2
EIRP
Complies with clause 4.2.1.3
Transmitter Spurious
Emissions (30 MHz to 6
GHz)
Complies with clause 5.3.4
Frequency Stability Under
Low Voltage Conditions
Complies with clause 4.2.1.5
Receiver Spurious
Emissions
Complies with clause 4.2.2.1
Spectrum Access
Complies with clause 4.2.3.1
Receiver Blocking
Complies with clause 4.2.3.2