Inateck BCST-55 - Custom Code Prefix;Suffix Setting

Enter Setup
Exit and Save
37
GS1 DataBar
GS1 DataBar Limited, GS1 DataBar Expanded, GS1 DataBar Stacked etc. share the same
setting barcodes below with GS1 DataBar.
Enable/Disable GS1 DataBar
(*) Enable GS1 DataBar
Disable GS1 DataBar
Enable/Disable GS1 DataBar Composite
(*) Enable GS1 DataBar Composite
Disable GS1 DataBar Composite
QR Code
Micro QR Code share the same setting barcodes below with QR Code.
Enable/Disable QR Code
(*) Enable QR Code
Disable QR Code
Normal/Inverted QR Code Recognition
"Read Normal QR Code Only" means the scanner will only read the QR codes with white
background and black lines. "Read Normal and Inverted QR Code" means those with black
background and white lines can also be read like the normal ones. The scanner defaults
reading normal QR codes with white background and black lines only. You can set it as
"Read Normal and Inverted QR Code" as per your needs.
(*) Read Normal QR Code Only
Read Normal and Inverted QR Code