EasyManua.ls Logo

Infasecure CS4010 - USE - TO RELEASE INFANT

Infasecure CS4010
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INFANT
WITH INBUILT HARNESS
USE
TO RELEASE INFANT
FOR EASE OF USE
To release your child from the restraint simply press
the harness buckle and carefully remove your child
from the seat (refer Figure 1).
No need to disconnect the Upper Anchorage
Strap.
To access your baby simply;
- Loosen upper anchorage strap
(refer Figure 2).
- Lower strap out of way
(refer Figure 3).
Reverse procedure when reseating the baby.
NOTE: If upper anchorage strap has been loosened to
allow easier placing of the baby in the restraint,
tighten the upper anchorage strap so it has no slack
in it. DO NOT TIGHTEN EXCESSIVELY.
Always use the Upper Anchorage Strap
and Attachment Clip attached to the
Anchor Fitting.
Always ensure the upper anchorage strap
is positioned correctly.
Always adjust to remove the slack from
the upper Anchorage Strap.
Always use Upper Anchorage Strap Guide
Fit the restraint rmly to the car seat.
WARNING
!
Upper Anchorage
Strap
LOWER OUT OF WAY
Upper Anchorage
Strap
Upper Anchorage
Strap Guide
Figure 1
Figure 2
Figure 3
18

Related product manuals