TO REMOVE COVER
Step 1: Disengage buckle tongues from the buckle.
Step 2: Feed shoulder strap webbing and buckle tongues through the thigh slot holes in the cover.
Step 3: Feed buckle through the crotch slot hole of the cover.
Step 4: Do steps 1 & 2 from “Replace Harness”.
TO REPLACE COVER
SEAT COVER
Step 1: Slide the harness shoulder straps out through the gates in the metal spreader plate.
Pull the harness shoulder straps through the shoulder slots to the front of the restraint.
Step 2:
Step 3: Once cover is removed, “CLICK” the buckle tongue back into the buckle for safe keeping.
Only use this child restraint with the cover supplied or a manufacturer-
Authorised replacement cover with identical shoulder height markers
VERY IMPORTANT
!
Disengage the buckle and tongues. Push the buckle through the crotch slot in the cover.
Pull the cover up and through the shoulder strap webbing and buckle tongues. Do NOT
remove the harness from under the seat.
The child restraint cover has been manufactured to meet the Australian Standards requirements
for ammability and toxicity to ensure your child's safety. The cover has also been designed to
provide your child with comfort and support.
29
To Next Page
Loading...
