Infineon TRAVEO T2G - Page 20

User Guide 20 of 25 002-32910 Rev. *A
2021-09-29
Getting started with TRAVEO™ T2G entry family starter kit
Download and debug with starter kit
4. The rebuild process starts. Check for errors and warnings in the Build log.
Figure 25 Checking build status in build log
5. To load the program to the flash region of CM0+ and CM4 cores, click the green Download and Debug icon.
This will automatically open the CM4 multicore client workspace, and the corresponding code will be
downloaded into the flash region of respective cores.
Figure 26 Downloading and debugging