29
Timer
Auto Off Time: au
tomatically turns the projector off after no signals are
detected for a preset number of minutes. If an active signal is received before
the projector powers down, the image will be displayed.
High Altitude Setting
High Altitude:
We recommend you turn on the High Altitude Mode when
your environment is between 5000' (1500m) and 10,000' (3000m) above sea
level.
Status/Service:
Source Info: a read-only display of current source settings.
Projector Info: a read-only display o
f current projector settings and lamp
hours.
Reset Lamp Hours...: rese
ts the lamp hours used counter in the Projector
Info menu to zero. Do this only after changing the lamp.
Factory Reset...: res
tores all settings to their default.
Service Code...: on
ly used by authorized service personnel.
To Next Page
Loading...
