What to do if the sound is distorted on InFocus IN8606HD Projector?
If the sound is distorted, check the audio cable connection. Also, test the source audio output with other speakers. If the issue remains, have the projector serviced.
How to adjust color of the projected image on InFocus Projector?
To adjust the color of the projected image, adjust the Color Temperature and Gamma settings on the Image->Advanced menu of the OSD.
Essential safety guidelines for operating the projector, including warnings and precautions.
Explanation of warning symbols and text styles used in the manual for important information.
Guidelines for safe use of the power cord and battery handling for the remote control.
Procedures for safely replacing the projector lamp and cleaning the unit's exterior and lens.
Views of projector front, right, and top panels, including OSD buttons and LEDs.
Views of projector rear connectivity ports and bottom mounting points.
Identification of all buttons and features on the remote control unit.
Information on operating range and button functions for the remote.
Step-by-step guide for installing batteries in the remote control.
Instructions for powering the projector up and down safely.
How to set and manage a password to prevent unauthorized projector use.
Guidelines for setting the projector's physical angle and stability.
How to control image size, sharpness, and correct trapezoid distortion.
Instructions for controlling the projector's audio output level.
How to navigate through the OSD menus using the remote control.
Procedure for selecting the desired display language for the OSD.
A diagram illustrating the structure and options within the OSD menus.
Adjustments for PC video input signals like position, frequency, and tracking.
Detailed image adjustments like sharpness, gamma, and color temperature.
Fine-tuning Red, Green, Blue gain/offset and color saturation/hue.
Adjusting volume, mute, and SRS surround sound features.
Configuration options including language, security lock, and 3D settings.
Settings for test patterns and image shift adjustments.
Displaying operational status like active source, lamp hours, and software version.
Settings within Settings 2 menu, including menu position and lamp hour reset.
Settings within Settings 2 menu, including sleep timer and source filter.
Detailed steps for safely removing and installing the projector lamp module.
Procedure to reset the lamp usage timer after lamp replacement.
Instructions for safely cleaning the projector's exterior, lens, and case.
How to secure the projector using a Kensington lock and cable.
Information on utilizing the security bar for enhanced protection.
General tips for diagnosing and resolving projector issues.
Best practices for effective problem diagnosis and support interaction.
Table detailing projector status based on LED indicator lights.
Solutions for common display issues like no image or blurriness.
Correcting trapezoid effect, image reversal, and streaking.
Troubleshooting steps for projector lamp not lighting or turning off.
Solutions when the projector does not respond to remote control commands.
Diagnosing and fixing issues with sound output.
Guidance on when and how to seek professional technical support.
Table correlating projection distance with screen size.
List of supported signal resolutions and sync frequencies.
Detailed physical measurements of the projector unit.
Information regarding compliance with FCC Part 15 for Class B digital devices.
Statement of compliance with Canadian ICES-003 standards.
List of safety and compliance marks obtained by the product.
General| Display Technology | DLP |
|---|---|
| Native Resolution | 1920 x 1080 |
| Lamp Life (Eco) | 6000 hours |
| Keystone Correction | Vertical: ±40° |
| Speakers | 10W |
| Input Lag | 16 ms |
| Zoom Ratio | 1.2:1 |
| Projection Size | 30-300 inches |
| Inputs | HDMI, VGA, USB |
| Weight | 7.3 lbs (3.3 kg) |
To Next Page
