InFocus P111 - Basic Projector Usage; Turning the Projector On and Off

IN3144_IN3146_IN3148HD User’s Manual
— 11 —
Turning the projector on and off
1.
Connect the power cord to the
projector. Connect the other end to
a wall outlet.
The POWER LED on the
projector light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED is not
flashing. Then press the POWER
button to turn on the projector.
The projector splash screen displays
and connected devices are
detected.
See Setting an Access Password
(Security Lock) on page 13 if the
security lock is enabled.
4.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
the devices.
(Component is supported using a
RGB to COMPONENT ADAPTER.)
• VGA1 / VGA2: Analog RGB1 / RGB2
• HDMI1 / HDMI2: High-Definition Multimedia Interface
• Composite Video: Traditional composite video
• S-Video: Super video (Y/C separated)