IN3144_IN3146_IN3148HD User’s Manual
— 30 —
3D Setting
ITEM DESCRIPTION
3D Press the ◄► buttons to enter and select different 3D modes.
3D Sync Invert Press the ◄► buttons to enter and enable or disable 3D Sync Invert.
3D Format Press the ◄► buttons to enter and enable or disable different 3D formats.
Note:
1. By default, if no 3D source is detected, the 3D OSD menu items will not be available.
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu items are available
for selection.
3. Use 3D glasses to view a 3D image.
4. You need 3D content from a 3D Blu-Ray or 3D media file.
5. You need to enable the 3D source (some 3D Blu-Ray content may have a 3D on-off selection
feature).
6. You need DLP link 3D glasses.
7. The OSD 3D mode needs to match the type of glasses (DLP link or IR).
8. Power on the glasses. Glasses normally have a power on -off switch.
Each type of glasses has their own configuration instructions. Please follow the configuration
instructions that come with your glasses to finish the setup process.
To Next Page
Loading...
Need help?
General
