EasyManua.ls Logo

Infortrend EonNAS Pro Series - Page 23

Infortrend EonNAS Pro Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EonNAS Pro Series Hardware Manual
The follo
wing transceiver and cables have been tested and proven to be compatible
with your systems.
Item part number Description
IFT-9370CSFP10G-0010 Small Form Pluggable 10Gb Optical Transceiver
IFT-9270CFCCab01
Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH,
O.D.=1.8mmx2, 1 Meter
IFT-9270CFCCab02
Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH,
O.D.=1.8mmx2, 5 Meters
IFT-9270CFCCab03
Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH,
O.D.=1.8mmx2, 10 Meters
The 10Gb iSCSI host ports connect to host adapters (HBA) that feature a 10Gbps
transfer rate, SFP+ interface, and support full-duplex transfer. The HBA card best
come with a 64-bit/133MHz PCI-X or PCI-E interface.
WARNING!
The SFP transceiver contains a laser diode featuring class 1 laser (incompliance
with Code of Federal Regulations (CFR), Title 21, Part 1040).
All cables are sensitive and must be handled with care. To prevent interference
within a rack system, the cable routing path must be carefully planned and the
cables must not be bent.
Lasers
CAUTION!
Lasers can be hazardous and may cause permanent eye damage or blindness,
and therefore must be treated and used with caution. Never look directly at the
lasers.
23

Table of Contents

Related product manuals