Infortrend EonNAS Pro Series - For Systems with a LCD Screen

EonNAS Pro Series Hardware Manual
For systems with a LCD screen
Simply plug in a USB flash drive to the front USB port and the LCD will display the
following:
SELECT
ENTER
O
ne touch copy?
-> Yes No
Press the “Select” button to choose between the options and “Enter” to execute your
selection. When completed, the LCD will display the following:
SELECT
ENTER
One touch copy
completed
When the One-Touch copy function has failed, the LCD will display the following:
SELECT
ENTER
One touch copy
failed
When the “One touch copy” function has NOT been setup and a USB flash drive is
plugged into the front USB port, it will show the following:
SELECT
ENTER
O
ne touch copy,
not configured
Pressing the ENTER or SELECT button will bring you to the following screen:
SELECT
ENTER
E
xternal USB
disk drive ready
From here, pressing the ENTER or SELECT button will bring you back to the main
menu.
SELECT
ENTER
EonNAS_Pro_xxx
x
xx.xxx.xxx.xxx
55