EonNAS Pro Series Hardware Manual
Shutdown
Press the “Enter” button to bring up the confirmation screen (Yes or No). Press the
“Select” button to choose yes or no and the “Enter” button to make your selection. The
system will sound one beep before shutting down. If you press Enter while selecting:
Yes: system shuts down (a beep will sound)
No: returns to the previous menu
SE LECT
ENTER
Main menu
Pool
SE LECT
ENTER
Main menu
[Go back]
SE LECT
ENTER
Main menu
Hard disk
SELEC T
ENT ER
Main menu
Network
SELEC T
ENT ER
EonNAS_Pro_xxx
xxx.xxx.xxx.xxx
SE LECT
ENTER
hutdown?
Yes ->No
SELECT
ENTER
SE LECT
ENTER
Main menu
System
SE LECT
ENTER
Main menu
Shutdown
ENTER
Main menu
Reboot
SE LECT
SEL ECT
ENTER
Shutting down...
Note:
If the system becomes unresponsive, users can force shutdown the system. To force
shut down the system, press and hold (approx. 5 seconds) the power button until the
system shuts down. This should only be done when the system is unresponsive!
49
To Next Page
Loading...
