EonNAS Pro Series Hardware Manual
Connections, Powering-on & Initialization
Connecting the NAS System
NOTE
Make sure you have at least installed one hard drive into the NAS system.
1
1
4
2
5
3
The system connection requires the user to
(1) Connect an Ethernet cable from the NAS system to a switch / router
(2) Place the CD that came with the system into your PC’s CD-ROM
(3) Connect an Ethernet cable from the “SAME” switch / router to the PC
(4) Connect the power cable to the NAS system and to a power outlet
(5) Press the power button to start up the system
29
To Next Page
Loading...
