EonNAS Pro Series Hardware Manual
10Gbps iSCSI Host Ports (selected models only)
eSA TA
1
2
RS 232/485
CH3 CH4
LED status Color
LED Color & Status
Steady ON
Green
Steady green indicates a link has been
established
Flashing Green
Flashing green indicates an active link
Off Off
Off indicates a link has not been established
The 10Gbps host connectivity is achieved by inserting SFP+ into the SFP+ cages
on iSCSI ports and data signals are sent through optical cables.
The 10Gbps iSCSI allows for optical connections, only. Optical cables can be used
over longer distances and are more reliable. Due to the demands of high transfer
rates, optical cables are preferred for 10Gb iSCSI connectivity.
22
To Next Page
Loading...
