INFOSEC UPS SYSTEM E4 Evolution II + TT Series - 2-1. Unpacking and Inspection

63
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
hotline : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 07 19 AA 59 205 03

Before installation, please inspect the unit. Make sure that nothing inside the package is damaged.
Please keep the original package in a safe place for future use.
 There are different types of E4 Evolution II TT UPS: standard and long-run models both in High
Voltage and Low Voltage. Please refer to the following table.
 The Dual Input function is optional for the models E4 Evolution II + 10/15/20k TT HV and E4
Evolution II + 10k TT LV and as standard for the models E4 Evolution II + 30/40/60/80 TT HV and E4
Evolution II + 15/20/30/40 TT LV.
Model
Version
Model
Version
E4 Evolution II + 10k TT HV
Standard model
High Voltage
E4 Evolution II + 10k TT S HV
Long-run model
High Voltage
E4 Evolution II + 15k TT HV
E4 Evolution II + 15k TT S HV
E4 Evolution II + 20k TT HV
E4 Evolution II + 20k TT S HV
E4 Evolution II + 30k TT HV
E4 Evolution II + 30k TT S HV
E4 Evolution II + 40k TT HV
E4 Evolution II + 40k TT S HV
-
E4 Evolution II + 60k TT S HV
E4 Evolution II + 80k TT S HV
E4 Evolution II + 10k TT LV
Standard model
Low Voltage
E4 Evolution II + 10k TT LV
Long-run model
Low Voltage
E4 Evolution II + 15k TT LV
E4 Evolution II + 15k TT S LV
E4 Evolution II + 20k TT LV
E4 Evolution II + 20k TT S LV
-
E4 Evolution II + 30k TT S LV
E4 Evolution II + 40k TT S LV
High Voltage (HV) means rated voltage 380 / 400 / 415 VAC
Low Voltage (LV) means rated voltage 190 / 198 / 208 VAC