INFOSEC E6 LCD RT EVOLUTION (S) 1000 - Page 52

INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel: +33 (0)2 40 76 15 82 – fax: +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 12 AA 59 203 06
52
 08: Programmable outlets setting
Interface
Setting
0-999: setting the backup time limits in minutes from 0-999 for
programmable outlets which connect to non-critical devices on
battery mode.
 09: LCD display direction setting
Interface
Setting
RAC: the LCD display is horizontal.
TOE: the LCD display is vertical.
 10: Acceptable input voltage range setting
Interface
Setting
For 208/220/230/240 VAC models, you may choose the following
Acceptable input voltage range:
110/300 alternating flashing: acceptable input voltage range is
from 110V to 300V;
160/260 alternating flashing: acceptable input voltage range is
160V to 260V;
170/270 alternating flashing: acceptable input voltage range is
170V to 270V;
For 110/150/120/127 VAC models, you may choose the following
Acceptable input voltage range:
55/150 alternating flashing: acceptable input voltage range is
from 55V to 150V;
80/130 alternating flashing: acceptable input voltage range is 80V
to 130V;
85/135 alternating flashing: acceptable input voltage range is 85V
to 135V;
 00: Exit setting