INFOSEC E6 LCD RT EVOLUTION (S) 1000 - 6 Specifications

INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel: +33 (0)2 40 76 15 82 – fax: +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 12 AA 59 203 06
59
6. Specifications
GENERAL CHARACTERISTICS
E6 LCD RT
EVOLUTION (S) 1000
E6 LCD RT
EVOLUTION (S) 2000
E6 LCD RT
EVOLUTION (S) 3000
Technology
On Line Double Conversion
Power (VA)
1000 VA
2000 VA
3000 VA
Power (W)
Standard models
900 W
1800 W
2700 W
Long backup time (S)
800 W
1500 W
2400 W
Power factor
Standard models
0.9
Long backup time (S)
0.8
TECHNICAL INPUT CHARACTERISTICS
Voltage range
Low line transfer
[80 / 70 / 60 / 55 VAC ± 5 %] or [160 / 140 / 120 / 110 VAC ± 5 %]
(based on load % : 100%-80% / 80%-70% / 70%-60% / 60%-0)
Low line comeback
[85 / 75 / 65 / 60 VAC ± 5 %] or [170 / 150 / 130 / 120 VAC ± 5 %]
Low line transfer
150 VAC ± 5 % or 300 VAC ± 5 %
Low line comeback
140 VAC ± 5 % or 290 VAC ± 5 %
Frequency range
40 Hz ~ 70 Hz
Phase
Single phase
Power factor
0.99 at 100% load
TECHNICAL OUTPUT CHARACTERISTICS
Voltage
[110/115/120/127 VAC] or [208/220/230/240 VAC]
Voltage regulation (battery mode)
± 1%
Frequency range (synchronized)
47 ~ 53 Hz or 57 ~ 63 Hz
Frequency range (battery mode)
50Hz ± 0.5% or 60Hz ± 0.5%
Current crest ratio (CF)
5:1 (max.)
Harmonic distortion (THDU)
≦ 2% (linear load)
8% max (battery mode before shut down)
Transfer time
AC to DC
Zero
Inverter to bypass
4 ms (typical)
Waveform
Pure Sine Wave
Backup time
From 4 to 30 min. depending on connected load
Output outlets
IEC type
standard/programmable
4 /4 (10A)
4 /4 (10A)
3 /3 (10A)
+ 1 standard (16A)
NEMA type
standard/programmable
2/2
4/4
2/2
EFFICIENCY
AC mode
86% (typical), 88% (max)
88% (typical), 90% (max)
Battery mode
83% (typical), 86% (max)
85% (typical), 88% (max)