INFOSEC E6 LCD RT EVOLUTION (S) 1000 - Faults Reference Code

INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel: +33 (0)2 40 76 15 82 – fax: +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 12 AA 59 203 06
54
Standby
mode
UPS is powered off without output
power, but the battery still can be
charged.
Fault mode
The UPS is in fault mode when no
output power is supplied from the
UPS and the fault icon flashes on the
LCD display, although the information
of UPS can be displayed in the
screen.
3-7. Faults Reference Code
Fault event
Fault
code
Icon
Fault event
Fault
code
Icon
Bus start fail
01
x
Low Inverter voltage
13
x
Bus over
02
x
Inverter output short
14
Bus under
03
x
Battery voltage too high
27
x
Bus unbalance
04
x
Battery voltage too low
28
Inverter soft start fail
11
x
Over temperature
41
x
High Inverter voltage
12
x
Overload
43