Ingenico iCT 200 Series - DEBIT & CREDIT CARD TRANSACTIONS; Credit Force (EMV & Swipe); Pre-Auth Completion

Quick Reference Guide
May 2012
DEBIT & CREDIT CARD TRANSATIONS
Credit Force (EMV & Swipe)
1.
Press [OK] (green) key
2.
Select 6- Force
3.
Enter Amount and press OK
4.
Pass terminal to the customer
5.
Customer swipes or inserts card
6.
Customer selects the language
7.
Customer selects the payment
method
8.
Customer confirms the selected
application
9.
Customer passes the terminal
to Merchant
10.
Merchant enters the Approval
Code at the Enter Approval
Code prompt
11.
After transaction completed,
the receipts will be printed.
Pre-Auth Completion
1.
Press [OK] (green) key
2.
Select 3- Pre-Auth Completion
3.
Press the key that corresponds
to the desired search option in
the SEARCH menu.
4.
Enter the field that the terminal
is asking for from the original
pre auth receipt.
5.
Verify the information on the
screen and press OK
6.
Press [F4] (Select) to select the
transaction.
7.
Press [F1] (Accept) to confirm
the sale amount or press [F4]
(Change) to change the sale
amount.
8.
If [F4] (Change) is selected in
the previous step, enter the
new sale amount and press OK
9.
After transaction completed,
the receipts will be printed.