Tupelo Installation Guide Version: 1.0
Page | 7 of 25
From the Download Software page choose the “SCR Tupelo Terminal Installer” to download the
production installer for the SCR Controller:
For development installations please choose the “Dev SCR Tupelo Terminal Installer” instead to download
the development SCR Controller installer.
3.2 Installing the Windcave SCR Controller
3.2.1 Installation Location
Once downloaded open the file to start the installation wizard:
(It is recommended to run the application as administrator where possible.)
Choose your preferred installation location or leave on default, then press the “Install” button.
To Next Page
Loading...
