Ingenico iUP 250 - Page 18

Intégration Guide_iUP250&iUR250 18/83 Copyright © 2012 Ingenico
900009151 R11 000 01/1223 All rights reserved
1.3.1.2.7 MDB Slave
iUP250 PINPad unit can be connected by MDB slave. The connector type is
MDB 6 pins (Mini – Fit series 87827 (MOLEX)). iUP250 is powered on the MDB
connectors by power supply 12 to 30V DC (30V is a maximum).
A ferrite B & F ELECTRONICS CO.,
LTD. ref MD-05-265C or equivalent must be
added on the power cable.
1.3.1.2.8 MDB master (optional)
The iUP250 PINPad unit can be connected by MDB master if option available.
The connector type is MDB master 8 pins (Mini – Fit series 87827 (MOLEX)).
iUP250 does not support EXE power supply. A ferrite Würth ref 74271222 or
equivalent must be added with two turns on the cable.
Pin N°
Function
1
Vin
2
GND
3
NC
4
MDBS_RXD
5
MDBS_TXD
6
MDBS_COMMUN
Pin N°
Function
1
NC
2
NC
3
NC
4
NC
5
MDBM_RXD
6
ISO_GND
7
MDBM_TXD
8
ISO_GND